A new pilot flow reactor for high-intensity ultrasound irradiation. Application to the synthesis of biodiesel

In recent years, chemistry in flowing systems has become more prominent as a method of carrying out chemical transformations, ranging in scale from microchemistry up to kilogram-scale processes. Compared to classic batch ultrasound reactors, flow reactors stand out for their greater efficiency and flexibility as well as lower energy consumption. This paper presents a new ultrasonic flow reactor developed in our laboratory, a pilot system well suited for reaction scale up. This was applied to the transesterification of soybean oil with methanol for biodiesel production. This reaction is mass-transfer-limited initially because the two reactants are immiscible with each other, then because the glycerol phase separates together with most of the catalyst (Na or K methoxide). In our reactor a mixture of oil (1.6 L), methanol and sodium methoxide 30% in methanol (wt/wt ratio 80:19.5:0.5, respectively) was fully transesterified at about 45 °C in 1 h (21.5 kHz, 600 W, flow rate 55 mL/min). The same result could be achieved together with a considerable reduction in energy consumption, by a two-step procedure: first a conventional heating under mechanical stirring (30 min at 45 °C), followed by ultrasound irradiation at the same temperature (35 min, 600 W, flow rate 55 mL/min).Our studies confirmed that high-throughput ultrasound applications definitively require flow reactors.