کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
1442558 1509445 2010 4 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Improved open circuit voltage of the photovoltaic device using ferrocene as a donor material
موضوعات مرتبط
مهندسی و علوم پایه مهندسی مواد بیومتریال
پیش نمایش صفحه اول مقاله
Improved open circuit voltage of the photovoltaic device using ferrocene as a donor material
چکیده انگلیسی

In this work, we have studied the combination of ferrocene (Fc), the donor material and fullerene derivatives such as [6,6]-phenyl C61-butyric acid methyl ester (PCBM) and the acceptor material, for fabricating organic photovoltaic devices. The effect of temperature on open circuit voltage (Voc), short-circuit current density (Jsc), fill factor (FF) and the photoconversion efficiency (PCE), η has been investigated. By varying the annealing temperature, the Voc, FF and PCE, η, were increased up to 140 °C and further increasing of temperature it remains constant. However, the short-circuit current density was not varied concomitantly with other parameters. The maximum PCE was observed to be 0.053% at 140 °C, which is the best annealing temperature in the present study. There have been many attempts to synthesize Fc and fullerene dyads but as an application wise very few report are available. Therefore here we have tried to use Fc and PCBM for photovoltaic device applications.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Synthetic Metals - Volume 160, Issues 7–8, April 2010, Pages 779–782
نویسندگان
, , ,