Preparation of helical carbon and graphite films using morphology-retaining carbonization

Helical carbon and graphite films were prepared from iodine-doped helical polyacetylene (H-PA) film using currently developing morphology-retaining carbonization. It was found from scanning electron microscopy (SEM) observations that the hierarchical helical morphology of the H-PA film remains unchanged even after the carbonization at 800 °C. Besides, the weight loss of the film due to the carbonization was very small, which was only a few percent to the weight of the film before doping. Furthermore, the graphite film prepared by the subsequent heating at 2600 °C still retained the same morphology as those in the original H-PA film and in the helical carbon film prepared at 800 °C. X-ray diffraction (XRD) and Raman scattering measurements were then pursued. The results showed that graphitic crystallization proceeds in the carbon film through the heat treatment at 2600 °C. Transmission electron microscopy (TEM) image of a single helical graphitic fibril was also observed by ultrasonicating the graphite film in ethanol. Carbonization of the H-PA films by way of iodine doping was found to afford helical carbon and graphite films, where spiral morphologies and even helical fibril structures were completely preserved.