Preliminary study on mitigating steel reinforcement corrosion with bioactive agent

Corrosion causes over $100 billion in damage annually. Cinnamaldehyde, a bioactive agent derived from cinnamon bark, can mitigate the corrosion of metals but has a negative effect on hydration when incorporated in cementitious systems. In order to avoid these negative consequences while harnessing anti-corrosive properties, cinnamaldehyde was incorporated in a cementitious mixture through the use of lightweight aggregate (LWA). The same method was used for penetrating corrosion inhibitors in an attempt to reduce the time required for the inhibitor to reach and protect reinforcing steel. The setting time, compressive strength, heat evolution (via semi-adiabatic calorimetry), and autogenous shrinkage of the experimental mixtures were measured and an accelerated corrosion test (ACT) was used to quantify performance in a corrosive environment. Experimental mortars showed prolonged setting times, reduced compressive strength, heat evolution, and autogenous expansion. However, the experimental mortars showed an increase in time to cracking when exposed to a corrosive environment.