کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1455391 | 989041 | 2010 | 7 صفحه PDF | دانلود رایگان |
The possibility of re-using Glass Reinforced Plastic (GRP) industrial by-product powder in cement based composites was investigated. Firstly, the by-product was physically and chemically characterized. Secondly, mechanical, capillary water absorption and shrinkage measurements were carried out on cement mortars manufactured by replacing the 0%, 10%, 15% and 20% of the aggregate volume with GRP by-product and on self compacting concretes manufactured by replacing the 0%, 25% and 50% of the calcareous filler volume with GRP powder. The obtained results show that GRP industrial by-product powder could be used as a partial aggregate or filler replacement in cement based composites. A decrease in mechanical strength was detected on the cement-based materials manufactured by GRP addition. However, capillary water absorption and drying shrinkage of cement-based materials with GRP addition resulted in significantly lower values than those of the cement-based materials manufactured without GRP addition, involving enhanced durability.
Journal: Cement and Concrete Composites - Volume 32, Issue 3, March 2010, Pages 219–225