The influence of potassium–sodium ratio in cement on concrete expansion due to alkali-aggregate reaction

In concrete containing potentially reactive aggregates, deleterious alkali-aggregate-reaction (AAR) can be prevented by the use of suitable mineral admixtures or by limiting cement content and alkalis (Na2O-equivalent) of the cement. However, the Na2O-equivalent of cement may not always accurately define the potential of cement to cause AAR. In this study, the potential reactivity of concrete produced with cements having similar Na2O-equivalents but different K/Na-ratios has been measured and the composition of gel has been analyzed. Additionally, pastes and mortars have been produced to study the development of pore solution composition.The expansion of the concrete mixtures shows significant differences depending on the cement used. The different K/Na-ratio present in the cements is reflected in the pore solution of pastes and mortars and in the gel present in aggregates of the concrete mixtures. As the hydroxide concentration in the pore solutions of pastes and mortars produced with the different cements is nearly identical, the difference in K/Na-ratio has to be the reason for the observed differences in concrete expansion.