Young's modulus of cement paste at elevated temperatures

Calcium silicate hydrate is a porous hydrate that is sensitive to temperature and readily loses strength at elevated temperatures. Mechanical and chemical changes in the microstructure, due to escaping water, can significantly affect the mechanical properties, but these changes occur over different temperature ranges. By measuring Young's modulus as a function of temperature using the dynamic mechanical analyzer, the temperature range in which the greatest change in stiffness occurs can be identified. Additional mineralogy, pore size distribution, and composition analysis from high temperature X-ray diffraction, nitrogen sorption, and thermogravimetric analysis will demonstrate the changes in the microstructure. The results demonstrate that over 90% of the loss in stiffness occurs below 120 °C. Therefore, the damage is due to microcracking caused by pore water expansion and evaporation and not the change in mineralogy or composition. More damage, as indicated by greater loss in stiffness, occurs in stiffer and less permeable samples where higher stresses can develop.