Recycled carbon fibre-reinforced polypropylene thermoplastic composites

Comingled carbon fibre (CF)/polypropylene (PP) yarns were produced from chopped recycled carbon fibres (reCF) (20 mm in length, 7–8 μm diameter) blended with matrix polypropylene staple fibres (60 mm in length, 28 μm diameter) using a modified carding and wrap spinning process. Microscopic analysis showed that more than 90% of the reCF were aligned along the yarn axis. Thermoplastic composite test specimens fabricated from the wrap-spun yarns had 15–27.7% reCF volume content. Similar to the yarn, greater than 90% of the reCF comprising each composite sample made, showed a parallel alignment with the axis of the test specimens. The average values obtained for tensile, and flexural strengths were 160 MPa and 154 MPa, respectively for composite specimens containing 27.7% reCF by volume. It was concluded that with such mechanical properties, thermoplastic composites made from recycled CF could be used as low cost materials for many non-structural applications.