کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1466569 | 990064 | 2012 | 7 صفحه PDF | دانلود رایگان |
Recently accumulative roll bonding has been used as a novel method to produce particle reinforced metal matrix composites. In this study, aluminum matrix composite reinforced by submicron particulate alumina was successfully produced and the effects of number of ARB cycles and the amount of alumina content on the microstructure and mechanical properties of composites were investigated. According to the results of tensile tests, it is shown that the yield and tensile strengths of the composite are increased with the number of ARB cycles. Scanning electron microscopy (SEM) reveals that particles have a random and uniform distribution in the matrix by the ARB cycles and a strong mechanical bonding takes place at the interface of particle-matrix. It is also found that the tensile strength of the composite, as a function of alumina content, has a maximum value at 2 vol.%, which is 5.1 times higher than that of the annealed aluminum.
Journal: Composites Part A: Applied Science and Manufacturing - Volume 43, Issue 2, February 2012, Pages 261–267