کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1466773 | 990075 | 2012 | 10 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Laminate thickness and resin pressure evolution during axisymmetric liquid composite moulding with flexible tooling
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سرامیک و کامپوزیت
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
This paper presents experimental observations from the filling and post-filling stages of 1D axisymmetric Resin Infusion (VARTM) and RTM Light. A series of experiments have been performed to investigate the influence of mould flexural stiffness and fill mode on fluid pressure, cavity thickness, filling stage time, and post-filling stage time. Observations are also made on the effect of those parameters on the repeatability of nominally identical experiments. This paper helps identify the circumstances where a RTM simulation would be sufficiently accurate for an RTM Light process, and consequently where a full flexible tooling simulation is necessary.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Composites Part A: Applied Science and Manufacturing - Volume 43, Issue 4, April 2012, Pages 621–630
Journal: Composites Part A: Applied Science and Manufacturing - Volume 43, Issue 4, April 2012, Pages 621–630
نویسندگان
J. Timms, S. Bickerton, P.A. Kelly,