Micro- and macroscopic thermal expansion of stabilized aluminum titanate

The lattice expansion of aluminum titanate (AT) obtained by firing a mixture of alumina, rutile, strontium and calcium carbonate and silica was measured using neutron and laboratory X-ray diffraction. The microscopic data are compared with macroscopic measurement completed by dilatometry.A powder and a compact rod sample were compared to assess the influence of micro residual stresses locked into the solid structure at grain level, which could possibly be relieved upon grinding.Results show good correlation between neutron and X-ray diffraction techniques. They also show that a compact material behaves differently than a powder, contrary to what happens for other porous ceramics such as cordierite. The integrity factor model was used to rationalize the results and predict grain level stresses in all crystal directions and all phases (AT, Strontium aluminum silicate, alumina and residual glass). Calculation show that the AT c-axis is always under compression while all other crystal directions and phases are under tension. Those micro-stresses do not undermine the macroscopic mechanical properties of the material and confer to it its interesting properties like low thermal expansion and enhanced strain tolerance.