کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1476782 | 991162 | 2009 | 8 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Copper tracks processing on alumina by laser cladding: Elaboration and characterization Copper tracks processing on alumina by laser cladding: Elaboration and characterization](/preview/png/1476782.png)
A laser process allows achieving in air electrical tracks on alumina substrates with an electrical conductivity of 5.106 S m−1. Copper paste was first put on alumina substrates and it was heated following a narrow track (c.a. 400 μm wide). Copper melted and oxidized partially during treatment forming cuprite Cu2O. A reaction occurs between Cu2O and alumina substrates which provides, after cooling, a good bonding of the copper-based tracks onto the substrates. Conditions of laser exposure have to be sharply controlled: if insufficient, tracks do not adhere to the substrate, and if too long, alumina substrates are hollowed, cracked, with vaporizations of copper and ejections of alumina. However the feasibility of such a process is now established.
Journal: Journal of the European Ceramic Society - Volume 29, Issue 9, June 2009, Pages 1755–1762