Crystallization in homogeneous and phase-separated Pd41.25Ni41.25P17.5 bulk metallic glasses

• Crystallization of homogeneous and phase-separated Pd41.25Ni41.25P17.5 BMGs
• Crystallization of Pd40Ni40P20 BMGs
• Spherical precipitates of a structure of “nanocrystalline core + eutectic crust”
• The “cores” of different types of BMGs are of different compositions.
• The appearance of cubic precipitates at annealing temperatures ≥ 633 K

Earlier, it was shown that molten Pd41.25Ni41.25P17.5 alloys can be cast into BMGs (bulk metallic glasses) of different microstructures, which are: (i) homogeneous BMGs (A-type), (ii) homogeneous BMGs embedded with crystalline precipitates (B-type), and (iii) phase-separated BMGs (C-type). Their crystallization behaviors were studied in this paper. At low annealing temperatures, the crystallization is characterized by spherical precipitates, each of which consists of a nanocrystalline core and a eutectic crust. The cores of the three types of BMGs are not of the same composition. At high annealing temperatures, there are cubic precipitates in addition to the spherical precipitates. For reference purposes, the crystallization of amorphous Pd40Ni40P20, a widely studied BMG, was examined. It was found that spherical precipitates, with a core composition different from those of Pd41.25Ni41.25P17.5 BMGs, appear, but cubic precipitates are absent.