Optical and selected thermal properties of samarium-doped fluorochlorozirconate (FCZ) glass-ceramics: Formation and growth of BaCl2 nanocrystals in FCZ glass-ceramics

Photoluminescence (PL) and conventional and modulated temperature differential scanning calorimetry (DSC and MDSC) experiments have been carried out on a typical fluorochlorozirconate glass and glass-ceramics doped with Sm3+ and Sm2+ introduced by the addition of SmF3 and a reducing agent, NaBH4, into the initial mixture of constituents. The nominal FCZ composition was 53% ZrF4, 20% NaF, 3% AlF3, 3% LaF3, 1% SmF3, 1% BaF2, 19% BaCl2 (molar percentages). Prior to DSC and PL measurements, some of the glasses have been heat treated (annealed at an elevated temperature) under different conditions, which has resulted in glass-ceramics containing BaCl2 nanocrystals with a hexagonal and/or orthorhombic crystal structure, depending on the heat treatment conditions. Hexagonal nanocrystals may be obtained by a simple one step annealing process while the formation of orthorhombic crystallites requires sequential multistep annealing treatments. Long duration, low temperature annealing, required for the formation of orthorhombic BaCl2 nanocrystals, leads to the appearance of an endothermic enthalpy peak at around 250 °C on the conventional DSC thermogram. Temperature modulated DSC experiments identify a clear glass transformation in this regions; and the endothermic peak has been attributed to the structural relaxation enthalpy in the host glass which is usually obscured by the thermal effects associated with the formation of BaCl2 nanocrystals. The observed thermodynamic effects correlate with the suppression of the broad PL band around 900 nm, which is most likely due to Sm2+ ions near or in the “shell-region” of the glass surrounding the nanocrystals.

Research Highlights
► Optical and thermal properties of Sm2+-doped fluorochlorozirconate glass-ceramics are studied.
► Photoluminescence and temperature-modulated differential scanning experiments are used.
► Long duration, low temperature annealing leads to the formation of orthorhombic BaCl2 nanocrystals.
► Hexagonal nanocrystals may be obtained by a simple one step annealing process.
► Photoluminescence depends on the resulting glass-ceramic structure from various annealing steps.