Variation of the defect density in a-Si:H and μc-Si:H based solar cells with 2 MeV electron bombardment

Improvement of the performance of solar cells based on amorphous (a-Si:H) and microcrystalline (μc-Si:H) silicon requires understanding of the role of the deep defects – dangling bonds – in the bulk of the intrinsic a-Si:H or μc-Si:H absorber layers. A straightforward way to understand how these defects may affect the performance of the cells is to investigate changes in the device performance upon variation in the defect density.In the present work solar cells with a-Si:H and μc-Si:H absorber layers were exposed to 2 MeV electron bombardment. The performance of the cells after various bombardment doses and annealing steps was evaluated in view of the changes in the defect density of intrinsic layers, measured with ESR on nominally identical absorber layers irradiated in parallel with the cells.The defect density was varied over a range of 2 orders of magnitude. In the solar cells a strong degradation of performance is observed upon irradiation with the biggest effect on the short circuit current density JSC for both types of absorber layers. In most cases both VOC and JSC recover after the final annealing step (at 160 °C) for both types of cells.

► a-Si:H and μc-Si:H solar cells.
► Electron bombardment and subsequent annealing change defect density in i-layer.
► Dependence of the solar cell performance on the defect density in i-layer.
► a-Si:H solar cells are less sensitive to defect density increase than μc-Si:H cells.