Effect of aluminum ions on intrinsic sub-critical crack growth in metaphosphate glasses

Sub-critical crack growth in various kinds of metaphosphate glasses was investigated by using DCDC (Double Cleavage Drilled Compression) technique. The crack growth measurements were only being made in Region III, or in an inert environment. In order to evaluate intrinsic crack growth behaviors in Region III, crack propagation tests were performed in dehydrated heptane, and the crack velocity, v, was plotted as a function of the stress intensity factor, KI. Fracture toughness of glass was also estimated from a stress intensity factor at a given crack velocity. For binary metaphosphate glasses (50MO · 50P2O5, M = Zn, Mg, Ca, Ba), fracture toughness increases in the order of Mg > Ca > Zn > Ba. However, the slope of KI-v curve is almost unchanged. In the case of aluminum containing metaphosphate glasses, with increasing aluminum content, fracture toughness increases and the slope of KI-v curve becomes smaller, regardless of the type of divalent cations in glass. It is concluded that an addition of aluminum ions into metaphosphate glass results in both high toughness and easy fatigue. In addition, the structural role of aluminum ions on the intrinsic sub-critical crack growth is discussed in terms of the models of atomistic bond rupture.