کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1501469 | 993383 | 2008 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Microstructure and mechanical properties of aluminum–fullerene composite fabricated by high pressure torsion
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سرامیک و کامپوزیت
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
An Al-based composite containing fullerene (a mixture of C60 and C70) was fabricated using a process of severe plastic deformation through high pressure torsion (HPT) for the first time. Neither heating nor sintering was required during the HPT process, so in situ consolidation was successfully achieved at ambient temperature. Vickers microhardness reached almost 120 Hv, the composite had a tensile strength of more than 253 MPa with 0.18 nominal strain, and the grain size was reduced to ∼80 nm.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Scripta Materialia - Volume 58, Issue 9, May 2008, Pages 735–738
Journal: Scripta Materialia - Volume 58, Issue 9, May 2008, Pages 735–738
نویسندگان
Tomoharu Tokunaga, Kenji Kaneko, Keisuke Sato, Zenji Horita,