کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1501621 | 993389 | 2008 | 6 صفحه PDF | دانلود رایگان |

Friction stir processing (FSP) is a novel metal-working technique that provides microstructural modification and control in the near-surface layer of metal components. FSP of cast Al and Mg alloys resulted in the break-up of coarse dendrites and secondary phases, refinement of matrix grains, dissolution of precipitates and elimination of porosity, thereby improving the mechanical properties of the castings significantly. Cast Ti alloys do not contain harmful secondary phases and the dendritic structure is masked by the β to α allotropic transformation, but the coarse lamellar structure is undesirable. In this article, microstructure and particle refinement, accelerated dissolution of precipitates and alloy systems suitable for FSP were addressed.
Journal: Scripta Materialia - Volume 58, Issue 5, March 2008, Pages 361–366