کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1502495 | 993423 | 2006 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
X-ray micro-tomographic observations of hot tear damage in an Al–Mg commercial alloy
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سرامیک و کامپوزیت
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
X-ray micro-tomography and three-dimensional image analysis were used to characterize hot tearing. The formation and interconnectivity of deformation induced damage during hot tearing was quantified in specimens of DC cast aluminum alloy AA5182 (of composition Al–4.63%Mg–0.49%Mn–0.17%Fe–0.04%Cu) subjected to tensile load at a temperature of 528 °C (fraction solid ∼0.98) over a range of strains varying from 0 to 0.20 (failure). This technique also allowed for quantification of the porosity formed during DC casting.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Scripta Materialia - Volume 55, Issue 5, September 2006, Pages 489–492
Journal: Scripta Materialia - Volume 55, Issue 5, September 2006, Pages 489–492
نویسندگان
A.B. Phillion, S.L. Cockcroft, P.D. Lee,