Mechanically alloyed Al–I composite materials

Mechanically alloyed aluminum–iodine composites with iodine concentrations from 4 to 17 wt% were prepared from elemental aluminum and iodine. A reference sample was prepared from aluminum and AlI3. A shaker mill and an attritor mill, operating at both room temperature and liquid nitrogen temperature, were used for preparation. Materials were characterized by electron microscopy and X-ray diffraction. The iodine release upon heating was studied using thermogravimetry. Mechanical alloying was found to be effective for preparation of Al–I composites that do not release iodine until the material is brought to high temperatures. Mechanical alloying in nitrogen gas at liquid nitrogen temperature was more effective in preparing stabilized Al–I composites than milling at room temperature. Iodine was not retained in materials milled directly in liquid nitrogen. In addition to poorly crystalline AlI3, other iodine compounds were present in the products. Assuming that the products are similar to other mechanically alloyed materials, it is expected that iodine is mixed with aluminum on the atomic scale, forming metastable Al–I compounds where iodine may be bonded to aluminum more strongly than in AlI3, explaining why their thermal decomposition and respective iodine release occur at higher temperatures compared to decomposition and boiling of AlI3.