Fabrication and field emission properties of multi-walled carbon nanotube/silicon nanowire array

Silicon nanowire (SiNW) arrays were fabricated on silicon wafers by the metal-assisted chemical etching method. Varied average diameters of SiNW arrays were realized through further treatment in a mixed agent of HF and HNO3 of certain concentrations. After the treatment, there were more than 93% SiNWs with diameters smaller than 100 nm. The tip of each SiNW was subsequently wrapped with multi-walled carbon nanotubes (MWCNTs) with chemical vapor deposition method. The as-fabricated MWCNT/SiNW arrays were fabricated into electric field emitters, with turn-on field of 2.0 V/μm (current density: 10 μA/cm2), much lower than that of SiNW array (5.0 V/μm). The turn-on electric field of MWCNT/SiNW array decreased with the decreasing of the average diameter of SiNWs, indicating the performance of the field emission is relative to the morphology of SiNWs. As the SiNW array is uniform in height and easy to fabricate, the MWCNT/SiNW array shows potential applications in flat electric display.