کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1520402 | 1511781 | 2016 | 7 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Electrospun polyacrylonitrile/polyurethane composite nanofibrous separator with electrochemical performance for high power lithium ion batteries Electrospun polyacrylonitrile/polyurethane composite nanofibrous separator with electrochemical performance for high power lithium ion batteries](/preview/png/1520402.png)
• The PAN/PU based separators were prepared by multi-needle electrospinning technique.
• The electrospun separators displays good mechanical properties and thermal stability.
• These separators exhibit good wettability with liquid electrolyte, high ion conductivity and internal short-circuit protection.
• Nanofibrous composite nonwoven possesses stable cyclic performance which give rise to acceptable battery performances.
Lithium ion batteries (LIBs) for high performance require separators with auspicious reliability and safety. Keeping LIBs reliability and safety in view, microporous polyacrylonitrile (PAN)/polyurethane (PU) nonwoven composite separator have been developed by electrospinning technique. The physical, electrochemical and thermal properties of the PAN/PU separator were characterized. Improved ionic conductivity up to 2.07 S cm−1, high mechanical strength (10.38 MPa) and good anodic stability up to 5.10 V are key outcomes of resultant membranes. Additionally, high thermal stability displaying only 4% dimensional change after 0.5 h long exposure to 170 °C in an oven, which could be valuable addition towards the safety of LIBs. Comparing to commercialized polypropylene based separators, resulting membranes offered improved internal short-circuit protection function, offering better rate capability and enhanced capacity retention under same observation conditions. These fascinating characteristics endow these renewable composite nonwovens as promising separators for high power LIBs battery.
Figure optionsDownload as PowerPoint slide
Journal: Materials Chemistry and Physics - Volume 182, 1 October 2016, Pages 308–314