An experimental investigation on the breakup of surfactant-laden non-Newtonian jets

The combined effect of polymers and soluble surfactants on the dynamics of jet breakup, and especially on satellite drop formation, was experimentally investigated. Xanthan gum and Carbopol® 934 NF were dissolved in water with Sodium Dodecyl Sulfate as the surfactant. Controlled disturbances were imposed at the laminar jet interface using a piezoelectric vibrating nozzle with breakup dynamics recorded using a high-speed camera. Drop and ligament diameters were measured from the digital images. The focus of the work was investigating how bulk and interfacial properties of the prepared fluids influenced ligament and drop evolution. It was found that if the proper concentration of surfactant (close to the critical micelle concentration, CMC) was selected, and if the flow time scales were large enough, Marangoni interfacial stresses may lead to an increase in satellite drop size as previously reported for breakup simulations of shear-thinning jets covered with insoluble surfactant. It was also experimentally confirmed that the introduction of surfactant contributes to a delay in jet breakup.

► Study of capillary breakup of surfactant-laden polymeric jets.
► SDS and Xanthan gum or Carbopol are used.
► SDS is shown to enhance breakup lengths.
► SDS is shown to enhance satellite when at concentration close but below CMC.