کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1563437 | 999609 | 2009 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Mesoscopic modeling of austenite static recrystallization in a low carbon steel using a coupled simulation method
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مکانیک محاسباتی
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
This study presents a two-dimensional cellular automaton (CA) simulation of austenite static recrystallization (SRX) following hot deformation by coupling with a crystal plasticity finite element (CPFEM) modeling. The initial deformed microstructure and the spatial distribution of the stored deformation energy quantified by CPFEM were incorporated in the CA model as the input for the simulation of the subsequent SRX nucleation and grain growth. This modeling provides an insight into the influence of heterogeneous deformation on the subsequent SRX at the mesoscale. The influence of pre-deformation on the SRX microstructure evolution and the transformation kinetics are discussed for three deformation levels of ε = 0.3, 0.5, 0.8.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Computational Materials Science - Volume 45, Issue 2, April 2009, Pages 568–575
Journal: Computational Materials Science - Volume 45, Issue 2, April 2009, Pages 568–575
نویسندگان
Chengwu Zheng, Namin Xiao, Dianzhong Li, Yiyi Li,