کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1564369 | 999643 | 2007 | 10 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Modelling mechanical properties for non-hardenable aluminium alloys
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مکانیک محاسباتی
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
A range of mechanical properties have been investigated for non-hardenable aluminium alloys. Commercially pure aluminium, Al-Mn, and Al-Mg alloys in five tempers have been covered. In the models solid solution, particle strengthening and work hardening have been taken into account. Ab-initio calculations of the size and modulus misfit parameters that are needed in the solid solution hardening model have been performed. In accordance with the Labusch-Nabarro model, the solid solution hardening has been shown to be proportional to εL4/3c2/3, where εL is the Fleischer misfit parameter and c the solute concentration. A cold work parameter H has been introduced. The contribution from cold working is linear in H for the tensile strength and fatigue endurance, whereas the contributions to the yield strength and to the hardness are proportional to H0.5.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Computational Materials Science - Volume 41, Issue 1, November 2007, Pages 86-95
Journal: Computational Materials Science - Volume 41, Issue 1, November 2007, Pages 86-95
نویسندگان
Johan Zander, Rolf Sandström, Levente Vitos,