کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1570805 | 1514379 | 2015 | 9 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Effect of rolling methods on microstructure, recrystallization texture and magnetic properties in a Fe-2.5%Si-0.52%Al non-oriented electrical steel
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Effect of rolling methods on microstructure, recrystallization texture and magnetic properties in a Fe-2.5%Si-0.52%Al non-oriented electrical steel Effect of rolling methods on microstructure, recrystallization texture and magnetic properties in a Fe-2.5%Si-0.52%Al non-oriented electrical steel](/preview/png/1570805.png)
چکیده انگلیسی
The effect of rolling methods on microstructure, recrystallization texture and magnetic properties in a Fe-2.5%Si-0.52%Al non-oriented electrical steel prepared with initial columnar grains is investigated. The results show that warm rolling promotes η-fiber nucleation and leads to strong η-fiber recrystallization texture at moderate strain, and the promotion effect is not limited in initial {110} < uvw > grains. At higher rolling strain, the intensity of η-fiber texture decreases. Warm rolling also promotes deformation bands with high-angle boundary, and the occurrence of deformation bands is explained with the change of active slip system. The highest B50 value and iron loss lower than 3 W/kg are obtained in 0.5 mm warm rolled sample, corresponding to moderate rolling strain, and λ-fiber texture lowers magnetic anisotropy.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Characterization - Volume 108, October 2015, Pages 85-93
Journal: Materials Characterization - Volume 108, October 2015, Pages 85-93
نویسندگان
Ning Zhang, Ping Yang, Weimin Mao,