کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1572808 | 1514428 | 2006 | 10 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Effect of matrix structure on the impact properties of an alloyed ductile iron
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
An investigation was performed to examine the influence of the matrix structure on the impact properties of a 1.03% Cu, 1.25% Ni and 0.18% Mo pearlitic ductile iron. Specimens were first homogenized at 925 °C for 7 h and a fully ferritic structure was obtained in all ductile iron samples. Then, various heat treatments were applied to the homogenized specimens in order to obtain pearlitic/ferritic, pearlitic, tempered martensitic, lower and upper ausferritic matrix structures. The unnotched charpy impact specimens were tested at temperatures between â 80 °C and + 100 °C; the tensile properties (ultimate tensile strength, 0.2% yield strength and elongation) and the hardnesses of the matrix structures were investigated at room temperature. The microstructures and the fracture surfaces of the impact specimens tested at room temperature were also investigated by optical and scanning electron microscope. The results showed that the best impact properties were obtained for the ferritic matrix structure that had the lowest hardness, yield and tensile strength. Ductile iron with a lower ausferritic matrix had the best combination of ultimate tensile strength, percent elongation and impact energies of all structures.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Characterization - Volume 57, Issues 4â5, December 2006, Pages 290-299
Journal: Materials Characterization - Volume 57, Issues 4â5, December 2006, Pages 290-299
نویسندگان
Gülcan ToktaÅ, Mustafa Tayanç, Alaaddin ToktaÅ,