کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1573116 | 1514670 | 2016 | 9 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Influence of Ag and Co additions on glass-forming ability, thermal and mechanical properties of Cu-Zr-Al bulk metallic glasses
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
In this study, the effect different amounts of Ag and Co have on thermal stability, phase formation and mechanical properties of the glass-forming alloys (Cu0.5Zr0.5)95âxâyAl5AgxCoy (2â¤xâ¤5 and 0â¤yâ¤2) and Cu47.5âyZr47.5Al5Coy (0â¤yâ¤2) was investigated, respectively. The addition of Ag increases the glass-forming ability (GFA) of the alloys by enhancing the stability of the undercooled melt and by simultaneously reducing the stability of the B2 CuZr high-temperature phase. Co instead, has the opposite effect. It leads to an increased thermal stability of the B2 phase, as well as a decreased stability of the undercooled melt and, consequently, lowers the GFA of the alloys. Moreover, a metastable big cube phase precipitates in some alloys stabilized by oxygen, which is introduced during casting. There is a strong interdependence between the phase formation and the tendency of the present alloys to vitrify. This correlation can be captured by the K-parameter (Song et al. 2011 [1]) calculated from the respective transformation temperatures. The plastic strain of the present ternary, quaternary and quinary alloys reflects the GFA as well: the higher the tendency to form a glass, the smaller the plastic strain. Once B2 crystals precipitate in the glass, the plasticity is enhanced significantly.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 673, 15 September 2016, Pages 90-98
Journal: Materials Science and Engineering: A - Volume 673, 15 September 2016, Pages 90-98
نویسندگان
B. Escher, U. Kühn, J. Eckert, C. Rentenberger, S. Pauly,