کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1573172 | 1514670 | 2016 | 9 صفحه PDF | دانلود رایگان |
The microstructure of the 12Cr-ODS steel was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and electron backscatter diffraction (EBSD) techniques. The results showed that the microstructure consisted of fine and elongated grains, high density of dislocations, and large concentration of nm-scale oxide particles, which were identified as five types of crystal structures by high resolution TEM (HRTEM) imaging, such as monoclinic and cubic Y2O3, hexagonal and orthorhombic Y2TiO5, and cubic Y2Ti2O7. The dominant {001}<110> component and weaker <111> parallel to normal direction texture were observed. Besides, the yield stress was experimentally measured and quantitatively estimated. The findings indicated that theoretical calculation was in accordance with the experimental measurements, and strengthening contributions from solid-solution atoms and grain boundaries were linearly additive, whereas those from dislocations and oxide dispersoids were averaged by root mean square summation.
Journal: Materials Science and Engineering: A - Volume 673, 15 September 2016, Pages 624–632