کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1573672 | 1514688 | 2016 | 30 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Developing superplasticity in an aluminum matrix composite processed by high-pressure torsion
ترجمه فارسی عنوان
توسعه فوق پلازیتی در کامپوزیت ماتریس آلومینیوم که توسط چرخش فشار بالا پردازش شده است
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
آلیاژ آل 7075، سختی چرخش فشار بالا، کامپوزیت ماتریکس فلزی، فوق العاده پلاستیکی،
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
چکیده انگلیسی
An Al-7075 alloy reinforced with 10 vol% Al2O3 particulates was processed by high-pressure torsion (HPT) at room temperature under a pressure of 6.0 GPa through up to 20 turns. The metal matrix composite (MMC) showed significant grain refinement from an initial average grain size of ~8 μm to ~300 nm after processing by HPT through 20 turns. The Vickers microhardness also increased from an initial value of Hvâ167 to a saturation value after HPT processing of Hvâ260. Tensile testing at 623 K demonstrated the potential for achieving true superplasticity in the HPT-processed MMC with a maximum elongation of ~670% when testing at a strain rate of 1.0Ã10â2 sâ1.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 655, 8 February 2016, Pages 36-43
Journal: Materials Science and Engineering: A - Volume 655, 8 February 2016, Pages 36-43
نویسندگان
Shima Sabbaghianrad, Terence G. Langdon,