کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1573682 | 1514688 | 2016 | 10 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Thermo-mechanical responses of nanocrystalline Al-Fe alloy processed using mechanical alloying and high frequency heat induction sintering
ترجمه فارسی عنوان
واکنش های حرارتی مکانیکی آلیاژ آلومینیوم نانوبلورال با استفاده از آلیاژسازی مکانیکی و حرارت دادن القایی با حرارت بالا
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
چکیده انگلیسی
In the current investigation, a nanocrystalline alloy Al-10Â wt.% Fe was synthesized from metallic powders using the mechanical alloying (MA) technique, for various milling hours. The consolidation and sintering of the alloyed powders was performed in a high frequency induction heat sintering (HFIHS) machine. The minimum crystallite size and the maximum hardness of the sintered sample was found to be 30Â nm and 2.05Â GPa, respectively. The maximum compressive yield strength of the alloy was observed to be 660Â MPa at room temperature. The bulk nanocrystalline alloy produced from 150Â h milled powder showed significant enhancement in the thermal stability, this specific alloy displayed a compressive yield strength of 570Â MPa at 573Â K. The compression experimental results of sintered samples revealed high strength coupled with large deformation to failure.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 655, 8 February 2016, Pages 132-141
Journal: Materials Science and Engineering: A - Volume 655, 8 February 2016, Pages 132-141
نویسندگان
Muneer Baig, Hany Rizk Ammar, Asiful Hossain Seikh,