کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1573760 | 1514686 | 2016 | 46 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Hot compression deformation characteristics and microstructural evolution of a Co-Cr-Mo-C alloy: Effect of precipitate and martensitic transformation
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
The hot compression behavior of a Co-Cr-Mo-C alloy was studied in the temperature range of 1100-1200 °C and the strain rate of 0.001-1 sâ1. The influence of processing parameters including temperature and strain rate on the microstructure of the alloy was investigated. The flow curves of the hot compressed samples at the investigated deformation temperatures and strain rates exhibited single peak stress. The effect of the strain rate and temperature of deformation on the flow stress was studied using a hyperbolic sine-type equation. The calculated activation energy was about 744.5984 kJ/mol. The evidenced microstructural characteristics combined with the shape of the flow curves indicate that there is a competition between dynamic recrystallization (DRX) and precipitation phenomena, especially at low strain rates, i.e. 0.001 sâ1. The formation of precipitates at the grain boundaries prevent the mobility of boundaries and also cause the partial inhibition of the dynamic recrystallization. Whereas, long time for the precipitates coarsening causes the predomination of dynamic recrystallization. Thus, the serrated boundaries in microstructure along with oscillation in the flow curves take place due to this competition.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 657, 7 March 2016, Pages 383-392
Journal: Materials Science and Engineering: A - Volume 657, 7 March 2016, Pages 383-392
نویسندگان
F.Z. Hassani, M. Ketabchi, G.R. Ebrahimi, S. Bruschi,