کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1574181 | 1514702 | 2015 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Small Punch Creep deformation and rupture behavior of 316L(N) stainless steel
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
The Small Punch Creep (SPC) behavior of 316L(N) stainless steel has been evaluated under various loads in the range 300-1000Â N over a temperature range 898-973Â K. The SPC curves clearly showed the transient, secondary and tertiary stages of creep. The transient creep deflection data have been analyzed on the basis of Garofalo's equation. The trend of variations of rate of exhaustion of transient creep deflection and steady state deflection rate with applied load revealed that the SPC deformation obeyed first-order reaction rate theory throughout the transient region. Using Chakrabarty's membrane stretch model, the creep strain-time curves were derived from deflection-time data measured in SPC tests. The steady state creep rate values calculated from such derived strain curves were closer to corresponding values obtained from conventional creep tests. From the load exponent of steady state deflection rate and estimated activation energy for creep, the mechanism that governs the SPC deformation of 316L(N) stainless steel under investigated conditions was found to be dislocation creep.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 641, 12 August 2015, Pages 315-322
Journal: Materials Science and Engineering: A - Volume 641, 12 August 2015, Pages 315-322
نویسندگان
J. Ganesh Kumar, K. Laha,