کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1574423 | 1514712 | 2015 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
An examination of the elastic distortions of anvils in high-pressure torsion
ترجمه فارسی عنوان
معاینه انحرافات کششی عفونت ها در چرخش با فشار بالا
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
روش عنصر محدود اندازه گیری سختی، چرخش فشار بالا، تغییر شکل پلاستیک شدید
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
چکیده انگلیسی
Experiments and finite element modelling were used to examine the effect of elastic distortions of the anvils on plastic flow and sample geometry in the compression stage in high-pressure torsion. The results demonstrate that the curved disc surfaces observed consistently in HPT processing originate from elastic deformation of the anvils and the measured variations in the thicknesses of the samples depend upon the imposed pressure. It is shown also that the samples are further deformed during unloading of the anvils and this produces a peak in the strain in the central region of the disc as recorded in several experimental measurements of the local microhardness.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 631, 17 April 2015, Pages 201-208
Journal: Materials Science and Engineering: A - Volume 631, 17 April 2015, Pages 201-208
نویسندگان
Pedro Henrique R. Pereira, Roberto B. Figueiredo, Paulo R. Cetlin, Terence G. Langdon,