کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1574508 | 1514716 | 2015 | 9 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Effects of strain rate and temperature on hot tensile deformation of severe plastic deformed 6061 aluminum alloy
ترجمه فارسی عنوان
اثرات سرعت و دمای فشار بر تغییر شکل کششی گرمای 6061 آلیاژ آلومینیوم تغییر شکل پلاستیک شدید
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
رفتارهای کششی داغ، رطوبت گرم، تغییر شکل پلاستیک شدید آلیاژ 6061
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
چکیده انگلیسی
The hot ductility of severe plastic deformed AA6061 was studied at different temperatures and strain rates. The large processed by ECAP specimens with the dimensions of about 100 mmÃ100 mmÃ14 mm were then subjected to cold rolling (CR) in order to fabricate the long Ultra-fine grained sheets. According to microscopic observations and hot tensile tests, the combination of two severe plastic deformations (i.e. ECAP+CR) can affect significantly the refinement of grain/subgrain and the ductility of the studied alloy. The results were then compared with those of as-received and CRed cases. In case of ECAP followed by the cold rolling process, the effect of temperature on the ductility, strain rate sensitivity, activation energy and Zener-Hollomon parameter was higher than strain rate. It can be suggested that the possible mechanism dominated the hot tensile deformation during tensile testing is dynamic recovery and dislocation creep. Although the maximum hot ductility was obtained at 500 °C, an increase in the volume fraction of cavities and their distribution led to a decrease in hot ductility and superplasticity of AA6061 alloy processed by SPD .
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 627, 11 March 2015, Pages 1-9
Journal: Materials Science and Engineering: A - Volume 627, 11 March 2015, Pages 1-9
نویسندگان
A.A. Khamei, K. Dehghani,