کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1574681 | 1514724 | 2014 | 7 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Effects of heat treatment processes on the microstructures and properties of powder metallurgy produced Cu-Ni-Si-Cr alloy
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
The microstructure analysis suggested that the hardness or tensile strength increased after an aging heat treatment due to the large number of nanometer-sized precipitates of β-Ni3Si and δ-Ni2Si phases that were formed. The optimal heat treated P/M copper alloy (8-h solution heat treatment at 970 °C followed by 6-h aging at 450 °C) had an extremely good combination of an average sub-grain size (<30 μm), an average tensile strength (up to 820 MPa) and an average thermal conductivity (110 W/mK), which offers possibilities for application in mold tooling.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 619, 1 December 2014, Pages 221-227
Journal: Materials Science and Engineering: A - Volume 619, 1 December 2014, Pages 221-227
نویسندگان
Huei-Sen Wang, Hou-Guang Chen, Jhen-Wang Gu, Cheng-En Hsu, Chung-Yung Wu,