کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1575205 | 1514738 | 2014 | 9 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Effects of rolling temperature on the microstructure and mechanical properties of Ti-Mo microalloyed hot-rolled high strength steel
ترجمه فارسی عنوان
اثر درجه حرارت نورد بر ریزساختار و خواص مکانیکی فولاد ضد زنگ داغ فولاد تیتانیوم
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
ترجمه چکیده
اثرات شرایط نورد بر ریزساختار و خواص مکانیکی فولاد با مقاومت بالا بر روی فولاد گرم فولاد خرد شده بر روی فولاد تیتانیوم با تغییر درجه حرارت نورد از منطقه کریستالیزاسیون آستنیته به منطقه آستنیت + فریت دو فاز مورد بررسی قرار گرفت. نتایج نشان داد که درجه حرارت نورد نقش مهمی در خواص مکانیکی دارد که به طور قابل ملاحظه ای بر ویژگی های پالایش و بارندگی دانه ها تاثیر می گذارد. انجام نورد در مناطق با استفاده از منطقه آستنیت کریستالیزاسیون به منطقه آستنیت غیر کریستالیزاسیون قادر به ارائه ویژگی های ریزساختاری مطلوب برای خواص ضربه و همچنین مقاومت با ایجاد المان ساختار یکنواخت و ظریف دانه، ساختارهای جابجایی شده در داخل دانه و نسبتا بالا تراکم تعداد کاربید های خوب، هر چند که اثر سخت شدن بار تا حدودی کاهش می یابد توسط بارش ناشی از فشار.
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
چکیده انگلیسی
The effects of rolling condition on the microstructure and mechanical properties of Ti-Mo microalloyed hot-rolled high strength steel were investigated by varying rolling temperature from austenite recrystallization region to austenite+ferrite dual phase region. The results revealed that rolling temperature plays a decisive role in the mechanical properties by significantly affecting the characteristics of grain refinement and precipitation. Conducting the rolling in the regions through austenite recrystallization region to austenite non-recrystallization region was able to provide desirable microstructural features for impact properties as well as for strength by inducing a homogeneous and fine grain structure, well developed dislocation structures inside grain, and relatively high number density of fine carbides, although precipitation hardening effect was somewhat reduced by strain-induced precipitation.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 605, 27 May 2014, Pages 244-252
Journal: Materials Science and Engineering: A - Volume 605, 27 May 2014, Pages 244-252
نویسندگان
Yong Woo Kim, Jae Hyung Kim, Seong-Gu Hong, Chong Soo Lee,