کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1575694 | 1514754 | 2014 | 9 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Influence of Mn solute content on grain size reduction and improved strength in mechanically alloyed Al-Mn alloys
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Al-Mn alloys with a solid-solution Mn content ranging from 0 to 3.1Â at% were successfully prepared by high energy mechanical alloying at room temperature of an Al-8Â at% Mn sample. The solubility level obtained is up to five times the equilibrium solubility limit of Mn in Al (from 0.62Â at% Mn). In general, the observed microstructures are consistent with being a nanocomposite composed of an Al-Mn solid solution matrix with dispersed Mn particles. For alloys with solid solutions up to 3.1Â at%, increasing the Mn content correlated with a decrease in the matrix grain size down to a minimum of 12Â nm. High hardness values of ~4Â GPa were obtained. The main strengthening mechanism of the Al-Mn alloys is attributed to the grain size reduction. Further attempts to increase the dissolved solute content resulted in the precipitation of the Al6Mn equilibrium intermetallic phase.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 589, 1 January 2014, Pages 57-65
Journal: Materials Science and Engineering: A - Volume 589, 1 January 2014, Pages 57-65
نویسندگان
K.A. Darling, A.J. Roberts, L. Armstrong, D. Kapoor, M.A. Tschopp, L.J. Kecskes, S.N. Mathaudhu,