کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1576198 | 1514771 | 2013 | 8 صفحه PDF | دانلود رایگان |
Copper based hybrid composites containing nano-sized silicon carbide and carbon nanotubes reinforcements with minimal porosity were fabricated via mechanical milling followed by hot pressing technique. Microstructures of the powders and consolidated materials were studied using scanning electron microscope, X-ray diffraction, Raman spectroscopy, and scanning transmission electron microscope. Microstructural characterization of the materials revealed that the addition of nanosized silicon carbide reinforcement lowered the grain growth rate and enhanced the homogenization during mechanical milling. Microhardness measurements and compression test showed considerable improvements in mechanical properties of the composites due to the addition of nanoparticulates and the grain refinement. The strength of the composite materials was discussed using theoretical models of the Hall-Petch, Orowan, and thermal mismatch mechanisms to determine the contribution of each mechanism in total strength.
Journal: Materials Science and Engineering: A - Volume 572, 10 June 2013, Pages 83–90