کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1576441 | 1514780 | 2013 | 5 صفحه PDF | دانلود رایگان |
The ultra-microduplex structure was fabricated in a fully pearlitic Fe–0.8 wt% C steel after equal channel angular pressing (ECAP) at 923 K via the Bc route. The microstructures and mechanical properties, before and after deformation, were investigated using scanning electron microscopy and mini-tensile tests. The cementite lamellae are gradually spheroidized by increasing the number of ECAP passes. After four passes, the cementite lamellae are fully spheroidized. Microhardness and the ultimate tensile strength of pearlite increase with the strain, up to a peak value (after two passes) and then decrease significantly. The yield strength, elongation and percentage of reduction in area increase with the number of ECAP passes. The tensile fracture morphology changes gradually from brittle cleavage to typical ductile fracture after four passes.
Journal: Materials Science and Engineering: A - Volume 563, 15 February 2013, Pages 163–167