کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1577287 | 1514797 | 2012 | 9 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Microstructural evolution and mechanical properties of the Ti–6Al–4V alloy produced by vacuum hot-pressing Microstructural evolution and mechanical properties of the Ti–6Al–4V alloy produced by vacuum hot-pressing](/preview/png/1577287.png)
In this work, the properties of the titanium industry workhorse, the Ti–6Al–4V alloy, processed by vacuum hot-pressing are studied. More in detail, relative density, microstructure characterisation and chemical analysis, precisely oxygen, nitrogen and carbon content, as well as flexural properties and hardness are considered. Components with relative density as high as 98% and mechanical properties similar to the wrought alloy, where these properties are affected by the formation of a reacted layer due to the interaction between titanium and the boron nitride (BN) coating, are obtained.
► Hot-pressing is used to make almost fully dense Ti–6Al–4V alloy components.
► Study of the bending properties of the Ti–6Al–4V alloy processed by vacuum hot-pressing.
► Study of the interaction between Ti–6Al–4V and the BN coating.
► Microstructural evolution of prealloyed and master alloy materials with the temperature.
Journal: Materials Science and Engineering: A - Volume 546, 1 June 2012, Pages 189–197