Effect of dynamic strain aging on the appearance of the rare earth texture component in magnesium alloys

Binary Mg alloys were prepared containing Zn, Ce and Gd. These were extruded and the resulting mechanical properties were determined. The intensities of the rare earth (RE) texture components were measured and linked to the extrusion conditions. Tension and compression testing was carried out on samples taken from extruded bars and a Mg–0.5Ce cast alloy. Over particular temperature and strain rate ranges, dynamic strain aging (DSA) was observed. The ranges over which DSA occurred during testing are compared with the conditions under which the RE texture components were produced during extrusion. It is concluded that formation of the RE texture components can be enhanced by extruding when the rate sensitivity is negative, i.e. under conditions where DSA is taking place.

► High intensity of the RE texture component gave distinct mechanical properties.
► DSA took place during compression over a broad range.
► Extruding under DSA regions enhanced the formation of the RE texture components.