Deformed microstructure and mechanical properties of AM60B magnesium alloy under hypervelocity impact at a velocity of 4 km s−1

Deformed microstructure and mechanical properties of AM60B magnesium alloy under hypervelocity impact at a speed of 4 km s−1 were studied through optical microscope (OM), scanning electron microscope (SEM), transmission electron microscope (TEM) and indenter technique. The results show that the deformed microstructure below the crater can be classified as three zones, i.e. dynamic recrystallization zone, high density deformation twin zone and low density deformation twin zone. The refined and equiaxed recrystallized grains adjacent to the crater were formed, which should be attributed to the twining-induced dynamic recrystallization mechanism. The {101¯2}, {101¯1} deformation twins are confirmed through selected area electron diffraction (SAED) technique. The microhardness and yield strength in the deformed microstructure zone near the crater are much higher than that of the matrix, which should be attributed to strain hardening and grain refining.