کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1579720 | 1001230 | 2010 | 10 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Cold pressure welding of severely plastically deformed aluminium by divergent extrusion
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
The present investigation is concerned with cold pressure welding (CPW) of severely plastically deformed (SPD) aluminium. As a starting point, commercially purity aluminium is subjected to single pass equal channel angular pressing (ECAP) and subsequently joined by divergent extrusion (DIE). The mechanical integrity of the spliced components is then documented using notch tensile testing, showing that both the strength and the flow properties of the SPD processed base material are fully maintained across the joint after cold welding. This is because the DIE process implies a mixed deformation mode, i.e. homogenous shear deformation in the bulk and plain strain compression at the joint line where bonding occurs. Moreover, finite element (FE) modelling reveals that the combination of contact pressure to yield strength ratio and surface exposure needed to achieve full metallic bonding is comparable with that reported for bond formation in soft annealed aluminium. This means that SPD processing by ECAP does not alter the conditions under which bonding takes place during CPW, which makes the DIE method particularly useful for joining such materials.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 527, Issue 6, 15 March 2010, Pages 1351-1360
Journal: Materials Science and Engineering: A - Volume 527, Issue 6, 15 March 2010, Pages 1351-1360
نویسندگان
A. Lilleby, Ã. Grong, H. Hemmer,