کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1580311 | 1514842 | 2009 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Effect of the bainitic transformation temperature on retained austenite fraction and stability in Ti microalloyed TRIP steels
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
TRIP properties in four hot-rolled microalloyed steels were studied as a function of bainitic domain entrance temperature. It was found that this temperature affects the size and morphology of the retained austenite grains. Size and morphology was shown to play a role on the stability of the retained austenite. This stability was shown to be the major factor affecting the mechanical properties of these steels. In the case of the lowest bainitic temperature, the TRIP effect is hindered due to the premature transformation of austenite into martensite probably due to an insufficient carbon enrichment of the small austenite grains. Moreover the bainitic treatment performed at the highest temperature contained a very low volume fraction of retained austenite that does not transform even under deformation. Using TEM and the Kikuchi-line method, it was shown that the sample that did not undergo a phase transformation during FIB milling had a carbon concentration in its retained austenite grains of approximately 1.7%.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 518, Issues 1â2, 25 August 2009, Pages 89-96
Journal: Materials Science and Engineering: A - Volume 518, Issues 1â2, 25 August 2009, Pages 89-96
نویسندگان
A. Kammouni, W. Saikaly, M. Dumont, C. Marteau, X. Bano, A. Charaï,