کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1581173 | 1514856 | 2009 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Influence of Mn addition on microstructure and phase formation of spray-deposited Al-25Si-xFe-yMn alloy
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
The hypereutectic Al-25Si-xFe-yMn alloys (with the ratio of Mn to Fe (y/x) between 0 and 1 wt.%) were synthesized by spray forming. The microstructure of the spray-deposited preforms as well as the over-sprayed powders was investigated. The addition of Mn was aimed to improve the mechanical properties of the alloys through forming the particulate α-Al15(Fe,Mn)3Si2 phase to replace the acicular δ-Al4FeSi2 and β-Al5FeSi phases formed in the alloy without Mn. XRD results revealed that, for alloy with y/x = 0, almost single acicular δ-Al4FeSi2 phase presented in the over-sprayed powders, whereas the spray-deposited preform consisted of both δ-Al4FeSi2 and β-Al5FeSi phases. For alloy with y/x = 0.625, the particulate α-Al15(Fe,Mn)3Si2 phase began to appear in the deposited preform. When y/x increased to 1.0, δ-Al4(Fe,Mn)Si2, β-Al5(Fe,Mn)Si and α-Al15(Fe,Mn)3Si2 phases coexisted in the over-sprayed powders, whereas only particulate α-Al15(Fe,Mn)3Si2 phase could be observed in the deposited preform. These results can be explained with schematics for transformation of the intermetallics in light of the phase forming mechanisms involved during spray deposition.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 502, Issues 1â2, 25 February 2009, Pages 118-125
Journal: Materials Science and Engineering: A - Volume 502, Issues 1â2, 25 February 2009, Pages 118-125
نویسندگان
H.J. Huang, Y.H. Cai, H. Cui, J.F. Huang, J.P. He, J.S. Zhang,