کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1581431 | 1514860 | 2008 | 6 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Limits of the linear viscoelastic behaviour of polyamide 66 filled with TiO2 nanoparticles: Effect of strain rate, temperature, and moisture Limits of the linear viscoelastic behaviour of polyamide 66 filled with TiO2 nanoparticles: Effect of strain rate, temperature, and moisture](/preview/png/1581431.png)
Limits of linear viscoelastic behaviour of TiO2 nanoparticle-filled polyamides are estimated quantitatively by the results of uniaxial tension tests. The stress limit of the filled polymer is higher than that of the un-filled one. Their values are the lower, the higher the temperature and moisture content of test specimens, and the lower, the lower the strain rate. The concept of an energy threshold for the linear viscoelastic behaviour is used to comprehensively characterize the limits over a wide range of test conditions. The energy limit is not affected by the strain rate, temperature, or moisture, and its value for the filled polymer is higher than that for the un-filled one. When plotted in the stress–strain axes, the data for different test conditions fall on a common curve described by a quasi-linear energy function. The higher the energy, the wider the region of the linear viscoelastic behaviour.
Journal: Materials Science and Engineering: A - Volume 498, Issues 1–2, 20 December 2008, Pages 242–247