کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1581762 | 1514866 | 2008 | 6 صفحه PDF | دانلود رایگان |
Fe-based bulk metallic glasses have been designed using several modeling criteria. Quaternary alloys were successfully developed in the Fe-rich compositional region where the only solutes used were Cr, Nb, and B. Furthermore, the exceedingly high level of Fe, exceeding 75 wt.% in some alloys, makes this series of alloys, compositionally very close to conventional steel alloys. Therefore, their production using conventional facilities and materials is more easily attainable than previously developed bulk metallic glasses. The modeling criteria used, simultaneously analyzes the thermodynamics and kinetics of the vitrification behavior in a potential glass-forming alloy. A liquidus model, which determines and ranks the presence of deep eutectics, is used to determine the optimal compositional region. This criterion is cross-checked with an elastic strain model. Alloys compositionally located near a deep eutectic, while simultaneously containing a topology that induces significant elastic strain in a developing crystalline lattice exhibits experimentally good glass forming ability.
Journal: Materials Science and Engineering: A - Volume 492, Issues 1–2, 25 September 2008, Pages 230–235