کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
1581854 1514862 2008 4 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Effect of composition on the formability of quasicrystalline phase in mechanically alloyed Al–Cu–Fe powders
موضوعات مرتبط
مهندسی و علوم پایه مهندسی مواد دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله
Effect of composition on the formability of quasicrystalline phase in mechanically alloyed Al–Cu–Fe powders
چکیده انگلیسی

A systematic study has been carried out to investigate the effect of composition on the ability of mechanically alloyed Al–Cu–Fe powders to form quasicrystalline (QC)-phases. Their microstructures were measured by means of X-ray diffraction and transmission electron microscopy (TEM). The results show that the formation of Al–Cu–Fe QC-phases is sensitive to the starting ratio of the elements Al, Cu and Fe and that Al70Cu20Fe10 is the optimum composition among those studied. No single QC-phase was obtained, but a high volume fraction of the QC-phase can be obtained by a suitable choice of the milling time, annealing temperature and annealing time. The volume fraction of the QC-phase in Al70Cu20Fe10 powders milled for 2 h and annealed for 5 h at 750 °C is greater than 90%.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 496, Issues 1–2, 25 November 2008, Pages 362–365
نویسندگان
, , , ,