Studies on the physico-mechanical and thermal characteristics of blends of DGEBA epoxy, 3,4 epoxy cyclohexylmethyl, 3′,4′-epoxycylohexane carboxylate and carboxyl terminated butadiene co-acrylonitrile (CTBN)

Toughening of blend of diglycidyl ether of bisphenol-A (DGEBA) and 3,4 epoxy cyclohexylmethyl, 3′,4′-epoxycylohexane carboxylate, i.e. cycloaliphatic epoxy resin (CAE) with varying weight ratios (0–25 wt%) of carboxyl terminated butadiene acrylonitrile (CTBN) copolymer have been investigated. Fourier transform infrared (FTIR) spectroscopic analysis established that the interaction between oxirane groups of DGEBA, CAE and CTBN were responsible for characteristics peak shifts in the blends compared to their counterparts. Physico-mechanical properties of the prepared samples, e.g. tensile, flexural and impact strengths showed an optimum concentration of CTBN (15 wt%) into epoxy matrix, which offered maximum toughening. Thermal stability of the prepared samples was analyzed by dynamic thermogravimetric runs. Cross-sections of the cured samples which failed during impact testing have been critically studied through scanning electron microscopic (SEM) analysis to gain insight into the phase morphology.